diff --git a/Funkprotokoll.md b/Funkprotokoll.md
index ea78fbf..62ba743 100644
--- a/Funkprotokoll.md
+++ b/Funkprotokoll.md
@@ -1 +1,58 @@
-Willkommen im Wiki.
\ No newline at end of file
+# Funkprotokoll für die Zeitschaltung
+## Specs
+* Scakeabke Node Address Protocol
+  * http://www.hth.com/snap/
+  * http://www.hth.com/filelibrary/pdffiles/snap.pdf
+## Aufbau
+* CRC-8
+* 3 Data-Bytes (1 Command-Byte, 2 Daten-Bytes)
+* All Byte Descriptions are in LSB
+2.0 Protocol description.
+```
+SYNC Synchronization byte
+HDB2 Header Definition Byte 2
+HDB1 Header Definition Byte 1
+DAB1 Destination Address Byte
+SAB1 Source Address Byte
+DB3 Data Byte 3
+DB2 Data Byte 2
+DB1 Data Byte 1
+CRC1 High byte of CRC-8
+```
+### SYNC
+2.1 Synchronization byte - SYNC. `0b01010100`
+### HDB
+2.2 Overview of header definition bytes (HDB2 and HDB1).
+* HDB2 `0b01010000`
+  * DAB = Number of Destination Address Bytes (8,7 Bit) [1 Byte destination address]
+  * SAB = Number of Source Address Bytes (6,5 Bit) [1 Byte source address]
+  * PFB = Number of Protocol specific Flag Bytes (4,3 Bit) [0 Byte flags]
+  * ACK = ACK/NAK bits (2,1 Bit) [No ACK request (Tx)]
+* HDB1 `0b10110011`
+  * CMD = CoMmanD mode bit (8 Bit) [indicates that the data in DB1 contains a command]
+  * EDM = Error Detection Method (7,6,5 Bit) [8-bit CRC]
+  * NDB = Number of Data Bytes (4,3,2,1 Bit) [3 Bytes]
+### DAB
+Address 0 is reserved as a broadcast address and should not be used for anything else. Otherwise that is the destination address of the node.
+### SAB
+Source Address of that Node. If a Node hasn't a address it should use ´0xFF´
+### DB
+ * DB1 (`0x02`-`0x7F` Query, `0x82`-`0xFF` Responses)
+ * DB2 (1 Data-Byte, if not needed = 0)
+ * DB3 (2 Data-Byte, if not needed = 0)
+### CRC
+ * http://code.google.com/p/avr-code/source/browse/trunk/thermo/crc8.c
+## Addresses
+ * Brodcast-Address: `0x00`
+ * No Address Definded: `0xFF`
+ * Controllers: `0xD0`-`0xE0`
+ * Actors: `0x10`-`0xAF`
+All others are reserved for future use!
+## Querys
+ * `0x02`: Status Request (Data: none)
+ * `0x03`: Request Set Address (Data: none) [the only vaild command that can send with SAB `0xFF`]
+ * `0x04`: Request Set Capabilitys (Data: none)
+## Responses
+ * `0x82`: Status Response (Data: 1 Byte; `0x01` Ready, `0x02` Armed, `0x03` Ilde)
+ * `0x83`: Set Adress (Data 1 Byte; Address)
+ * `0x84`: Set Capability (Data 1 Byte, `Bit 1`: Servo, `Bit 2`: Motor, `Bit 3`: Quickstart-Button, `Bit 4-8`: Reserved)
\ No newline at end of file