69 lines
3.4 KiB
C#
69 lines
3.4 KiB
C#
|
namespace Unosquare.WiringPi.Native
|
|||
|
|
{
|
|||
|
|
using System.Runtime.InteropServices;
|
|||
|
|
|
|||
|
|
public partial class WiringPi
|
|||
|
|
{
|
|||
|
|
/// <summary>
|
|||
|
|
/// This opens and initialises the serial device and sets the baud rate. It sets the port into “raw” mode (character at a time and no translations),
|
|||
|
|
/// and sets the read timeout to 10 seconds. The return value is the file descriptor or -1 for any error, in which case errno will be set as appropriate.
|
|||
|
|
/// The wiringSerial library is intended to provide simplified control – suitable for most applications, however if you need advanced control
|
|||
|
|
/// – e.g. parity control, modem control lines (via a USB adapter, there are none on the Pi’s on-board UART!) and so on,
|
|||
|
|
/// then you need to do some of this the old fashioned way.
|
|||
|
|
/// </summary>
|
|||
|
|
/// <param name="device">The device.</param>
|
|||
|
|
/// <param name="baud">The baud.</param>
|
|||
|
|
/// <returns>The result.</returns>
|
|||
|
|
[DllImport(WiringPiLibrary, EntryPoint = "serialOpen", SetLastError = true)]
|
|||
|
|
public static extern int SerialOpen(string device, int baud);
|
|||
|
|
|
|||
|
|
/// <summary>
|
|||
|
|
/// Closes the device identified by the file descriptor given.
|
|||
|
|
/// </summary>
|
|||
|
|
/// <param name="fd">The fd.</param>
|
|||
|
|
/// <returns>The result.</returns>
|
|||
|
|
[DllImport(WiringPiLibrary, EntryPoint = "serialClose", SetLastError = true)]
|
|||
|
|
public static extern int SerialClose(int fd);
|
|||
|
|
|
|||
|
|
/// <summary>
|
|||
|
|
/// Sends the single byte to the serial device identified by the given file descriptor.
|
|||
|
|
/// </summary>
|
|||
|
|
/// <param name="fd">The fd.</param>
|
|||
|
|
/// <param name="c">The c.</param>
|
|||
|
|
[DllImport(WiringPiLibrary, EntryPoint = "serialPutchar", SetLastError = true)]
|
|||
|
|
public static extern void SerialPutchar(int fd, byte c);
|
|||
|
|
|
|||
|
|
/// <summary>
|
|||
|
|
/// Sends the nul-terminated string to the serial device identified by the given file descriptor.
|
|||
|
|
/// </summary>
|
|||
|
|
/// <param name="fd">The fd.</param>
|
|||
|
|
/// <param name="s">The s.</param>
|
|||
|
|
[DllImport(WiringPiLibrary, EntryPoint = "serialPuts", SetLastError = true)]
|
|||
|
|
public static extern void SerialPuts(int fd, string s);
|
|||
|
|
|
|||
|
|
/// <summary>
|
|||
|
|
/// Returns the number of characters available for reading, or -1 for any error condition,
|
|||
|
|
/// in which case errno will be set appropriately.
|
|||
|
|
/// </summary>
|
|||
|
|
/// <param name="fd">The fd.</param>
|
|||
|
|
/// <returns>The result.</returns>
|
|||
|
|
[DllImport(WiringPiLibrary, EntryPoint = "serialDataAvail", SetLastError = true)]
|
|||
|
|
public static extern int SerialDataAvail(int fd);
|
|||
|
|
|
|||
|
|
/// <summary>
|
|||
|
|
/// Returns the next character available on the serial device.
|
|||
|
|
/// This call will block for up to 10 seconds if no data is available (when it will return -1).
|
|||
|
|
/// </summary>
|
|||
|
|
/// <param name="fd">The fd.</param>
|
|||
|
|
/// <returns>The result.</returns>
|
|||
|
|
[DllImport(WiringPiLibrary, EntryPoint = "serialGetchar", SetLastError = true)]
|
|||
|
|
public static extern int SerialGetchar(int fd);
|
|||
|
|
|
|||
|
|
/// <summary>
|
|||
|
|
/// This discards all data received, or waiting to be send down the given device.
|
|||
|
|
/// </summary>
|
|||
|
|
/// <param name="fd">The fd.</param>
|
|||
|
|
[DllImport(WiringPiLibrary, EntryPoint = "serialFlush", SetLastError = true)]
|
|||
|
|
public static extern void SerialFlush(int fd);
|
|||
|
|
}
|
|||
|
|
}
|