49 lines
1.7 KiB
Plaintext
49 lines
1.7 KiB
Plaintext
|
rc632:
|
||
|
|
- fix handling of timeout (program timer of RC632)
|
||
|
|
- add a timeout tolerance factor that can be user-specified
|
||
|
|
- make sure interrupt mode for timer wait works
|
||
|
|
|
||
|
|
cm5121:
|
||
|
|
- fix handling of TX or RX > 0x7f [buffer length in atmel chip?]
|
||
|
|
|
||
|
|
iso14443a:
|
||
|
|
[none]
|
||
|
|
|
||
|
|
iso14443b:
|
||
|
|
- implement 'option 2' frame markers
|
||
|
|
- test anticollission (need multiple tags)
|
||
|
|
|
||
|
|
iso15693:
|
||
|
|
- implement anticollision
|
||
|
|
- implement all the rest
|
||
|
|
|
||
|
|
mifare_clasic:
|
||
|
|
- test
|
||
|
|
- try to auto-detect 1k/4k
|
||
|
|
- try to distinguish mifare ultralight and mifare classic in/after anticol
|
||
|
|
|
||
|
|
tcl:
|
||
|
|
- implement pps for asymmetric (rx/tx) speeds
|
||
|
|
|
||
|
|
openct:
|
||
|
|
- add ifdhandler driver
|
||
|
|
|
||
|
|
other:
|
||
|
|
- implementation of code for various passive tags
|
||
|
|
- documentation
|
||
|
|
- add notion of 'asic implementation' for specifying reader-specific
|
||
|
|
initialization values such as mod_conductance
|
||
|
|
- abstract a read single block / read multiple block API where l2/proto
|
||
|
|
layer can provide multi-block function (e.g. iso15693), which will be
|
||
|
|
emulated in case there only is a single-block function
|
||
|
|
- switch over to use of rfid_buf structure, similar to linux skb. upper
|
||
|
|
layers have sufficient headroom in order to have lower layers add protocol
|
||
|
|
headers in front of a packet
|
||
|
|
- implement software checksumming support. The reader should be able to
|
||
|
|
indicate whether it supports hardware checksum generation / verification.
|
||
|
|
- application software should be able to override hardware csumming on request
|
||
|
|
- implement some auto-calibration mode where the user is requested to leave a
|
||
|
|
single PICC/VICC on the reader and the software iterates through various
|
||
|
|
mod_conductance and bitphase values to see whether it can calibrate to a given
|
||
|
|
[new] card. The resulting calibration values are printed by the program.
|