bla

2015-11-15 18:18:42 +00:00
parent 9ac343fc45
commit 72be7b0c2f
580 changed files with 356252 additions and 6 deletions
@@ -0,0 +1,66 @@
+dfu-programmer is an implementation of the Device Firmware Upgrade class
+USB driver that enables firmware upgrades for various USB enabled (with the
+correct bootloader) Atmel chips.  This program was created because the
+Atmel "FLIP" program for flashing devices does not support flashing via USB
+on Linux, and because standard DFU loaders do not work for Atmel's chips.
+
+Check out the Atmel website for more information.  They are kind enough to
+provide generally correct specifications this implementation is based on.
+
+The project website is http://dfu-programmer.sourceforge.net and you can
+use that to check for updates.
+
+Currently Supported Chips
+=========================
+8051 based:
+  at89c51snd1c
+  at89c5130
+  at89c5131
+  at89c5132
+
+AVR based:
+  at90usb1287
+  at90usb1286
+  at90usb647
+  at90usb646
+
+Simple install procedure
+========================
+
+  % tar -xzf dfu-programmer-<version>.tar.gz    # unpack the sources
+  % cd dfu-programmer                           # change to the top-level
+                                                # directory
+
+  [ If the source was checked-out from  CVS, run the following command ]
+  % ./bootstrap.sh                              # regenerate base config
+                                                # files
+  
+  % ./configure                                 # regenerate configure and
+                                                # run it
+
+  [ Optionally you can specify where dfu-programmer gets installed
+    using the --prefix= option to the ./configure command.  See
+    % ./configure --help for more details. ]
+
+  % make                                        # build dfu-programmer
+  [ Become root if necessary ]
+  % make install                                # install dfu-programmer
+
+Building RPM Binary Packages
+============================
+This section is intended to make it easier for those people that wish to
+build RPMs from the source included in this package, but aren't sure how.
+
+1) Copy dfu-programmer-<version>.tar.gz to your RPM SOURCES directory. Usually
+   this is /usr/src/redhat/SOURCES/.
+
+2) Extract or copy dfu-programmer.spec into your RPM SPECS directory. Usually
+   this is /usr/src/redhat/SPECS/.
+
+3) In your RPM SPECS directory, issue the command 'rpm -ba dfu-programmer.spec'.
+   This will cause rpm to extract the dfu-programmer sources to a temporary
+   directory, build them, and build rpm packages based on the information in
+   the spec file. The binary rpms will be put into your RPM RPMS directory.
+   Usually this is /usr/src/redhat/RPMS/<platform>/.
+
+If you have any further questions, please refer to the RPM documentation.